JupiteX Get the app
Science & Technology15 Nov 2026 · about 7 min

Modified Ender 3 becomes a $450 bioprinter for 3D printing engineered living materials

The brief

The team at the University of Rochester turned an Ender 3 FDM printer into a bioprinter for engineered living materials. They kept most of the printer’s frame and changed the print head, making the setup far less expensive than typical bioprinting hardware. The aim was to make this kind of research more accessible while helping printed living structures hold their shape. The replacement head was a syringe pump fitted with custom 3D-printed PETG parts. It used a 10 mL glass syringe and a plunger to control extrusion and retraction. Researchers designed shapes in SolidWorks, exported them as STL files, and sliced them in Slic3r, adjusting settings for a 0.254 mm needle. The bio-ink combined bacteria and alginate and was printed inside agarose or gelatin support gels. The pump dispensed material at 2 mL per hour at a print speed of 23 mm per second. Calcium ions in the support gel cross-link the alginate, helping it form a solid structure around the bacteria. The resulting printer cost $450, compared with bioprinters that typically cost more than $100,000.

01

How did the researchers modify an Ender 3 to print living material?

The team at the University of Rochester turned an Ender 3 FDM printer into a bioprinter for engineered living materials. They kept most of the printer’s frame and changed the print head, making the setup far less expensive than typical bioprinting hardware. The aim was to make this kind of research more accessible while helping printed living structures hold their shape.

The replacement head was a syringe pump fitted with custom 3D-printed PETG parts. It used a 10 mL glass syringe and a plunger to control extrusion and retraction. Researchers designed shapes in SolidWorks, exported them as STL files, and sliced them in Slic3r, adjusting settings for a 0.254 mm needle. The bio-ink combined bacteria and alginate and was printed inside agarose or gelatin support gels.

The pump dispensed material at 2 mL per hour at a print speed of 23 mm per second. Calcium ions in the support gel cross-link the alginate, helping it form a solid structure around the bacteria. The resulting printer cost $450, compared with bioprinters that typically cost more than $100,000.

02

How does the $450 printer’s cost compare with bioprinters that typically cost more than $100,000?

The University of Rochester team’s modified Ender 3 cost $450. The article contrasts that figure with bioprinters that typically cost more than $100,000. The difference matters because expensive hardware is one barrier to research on engineered living materials, or ELMs. The researchers designed their open-source printer as a lower-cost way to print these materials.

Rather than replace the whole machine, the team kept most of the Ender 3 and fitted it with a custom syringe-pump print head. A bacteria-and-alginate bio-ink went into the syringe, which extruded it into agarose or gelatin support material. The researchers used SolidWorks to design prints and Slic3r to prepare them, much like a standard 3D-printing workflow.

The price comparison shows how sharply the team reduced the cost of the hardware: $450 versus a typical cost above $100,000. The article says this could make ELM research more accessible and help developments happen faster. It does not give a precise cost for every bioprinter or say how many researchers will adopt the modified design.

03

How could making bioprinting much cheaper change who can research engineered living materials?

The researchers built a $450 bioprinter because costly hardware can limit work on engineered living materials. The article says bioprinters usually cost more than $100,000, and that hardware costs have slowed progress in this area. A much cheaper machine could make it easier for more research efforts to explore printing living materials, though the article does not identify specific new users or institutions.

The team adapted an Ender 3, keeping most of its structure and replacing the print head with a syringe pump. Custom PETG parts held a 10 mL syringe, which dispensed bio-ink made from bacteria and alginate. Researchers printed it inside agarose or gelatin gels. The design and slicing steps used SolidWorks and Slic3r, similar to a normal 3D-printing workflow.

The researchers made the printer open-source and developed support slurries to help printed materials keep their shape. The article presents affordability as a way to make ELM research more accessible and potentially speed up developments. It describes possible applications including antimicrobial biofilms, plastic degradation, wastewater treatment, and bacterial cellulose, but does not claim that the printer has already led to those uses.

04

What are engineered living materials, and how are they different from ordinary 3D-printed materials?

Engineered living materials, or ELMs, are materials made using living organisms and designed to have useful characteristics. In the study, the researchers focused mainly on bacteria and explored materials they can generate. Unlike an ordinary plastic print, an ELM contains living bacteria within a printed structure, so the material can remain viable after printing.

The team made bio-ink by mixing bacteria with alginate. They printed it inside agarose or gelatin support gels rather than extruding plastic filament. Calcium ions in the support material cause alginate strands to cross-link, forming a solid structure that encapsulates the bacteria. With agarose, the printed ELMs stayed viable for four or more weeks; gelatin was used for prints that could be extracted.

The paper discusses possible uses for bacteria-generated materials, including biofilms for antimicrobial treatments, plastic degradation, and wastewater treatment. It also describes bacterial cellulose with structural characteristics that could suit a biodegradable plastic alternative. These are areas the researchers explored or potential applications described in the article, not claims that every printed ELM is already being used commercially.

05

Why did the researchers use agarose for some prints and gelatin for others?

The researchers used two support gels because their prints had different needs. Agarose was for long-term incubation, while gelatin was for extractable prints. This gave the team options for keeping a living structure viable or removing a print from its support. The article does not provide further detail about how the two gels behave during extraction or incubation.

In both cases, the material being printed was bio-ink made from bacteria and alginate. The researchers deposited it inside agarose or gelatin support material. These support slurries were enriched with calcium ions, which cross-link the alginate strands and help form a solid structure around the living bacteria. The printer’s custom syringe pump dispensed the bio-ink in place of ordinary filament.

The reported result for agarose was that printed ELMs stayed viable for four or more weeks. Gelatin was identified as the choice for extractable prints. Together, these materials helped the researchers print living structures while addressing the challenge of keeping them in shape. The article presents the distinction as a practical choice based on whether a print was intended for long-term incubation or extraction.

06

How do calcium ions help alginate turn the bacteria-filled bio-ink into a solid structure?

The researchers’ bio-ink combined bacteria and alginate, and it was printed into support material enriched with calcium ions. Those ions help turn the soft, printed mixture into a stable structure. This matters because the team identified maintaining the shape of engineered living materials as a challenge for research and designed support slurries to address it.

The article describes the mechanism directly: calcium ions cause alginate strands to cross-link. The linked strands form a solid structure that encapsulates the living bacteria. The team printed the bio-ink inside either agarose or gelatin gels using a custom syringe-pump head attached to a modified Ender 3. Agarose was used for long-term incubation; gelatin was used for extractable prints.

The calcium-driven cross-linking is part of how the researchers supported printed ELMs, rather than a claim that the bacteria themselves created the structure. The article says agarose-supported prints remained viable for four or more weeks. It does not give additional chemical details about the cross-linking process, but it identifies calcium ions, alginate strands, and the resulting solid encapsulating structure.

07

What is synthetic biology, and how can engineered microbes make useful materials such as bacterial cellulose?

The article describes synthetic biology as combining engineering with microbiology. It treats microbes as machines and physical building blocks that can be used to achieve different functions. This approach supports research into engineered living materials: structures that use living microbes and materials they produce, rather than relying only on conventional nonliving print materials.

The researchers mainly experimented with bacteria and explored bacteria-generated biomaterials. One example is bacterial cellulose, which the article says has structural characteristics that could be used in applications such as a biodegradable plastic alternative. The team’s bio-ink mixed bacteria with alginate, then printed it inside agarose or gelatin. Calcium ions helped the alginate form a solid structure around the living bacteria.

The article also identifies potential applications including antimicrobial biofilms, plastic degradation, and wastewater treatment. Making bioprinting hardware more affordable could help ELM research progress faster, according to the article. It also raises the possibility of bacteria-based bioplastic filaments for FDM printers, but presents that as a possible future application, not an existing result of this work.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web