Climate change threatens livelihoods of India's traditional artisans
Erratic weather is making two traditional crafts less reliable: Mumbai pottery and Ajrakh hand-block printing in Gujarat’s Kutch region. This matters because both livelihoods depend on natural materials and weather conditions, so delays and damaged inputs can reduce output and earnings. In Dharavi, heavy rain can stop pottery work completely for three or four months. Flooding can disturb soil layers and change clay deposits, adding sand and other impurities. Potters say excessive heat can crack clay, putting product quality at risk. In Kutch, changing rainfall interrupts repeated washing, dyeing and printing, especially when cloth must dry. Lower groundwater and salty or iron-rich well water also affect dyes and prints. Artisans report inconsistent quality and slower work; experts say additional support will be needed to help them adapt.
How is increasingly erratic weather disrupting potters in Mumbai and textile printers in Gujarat?
Erratic weather is making two traditional crafts less reliable: Mumbai pottery and Ajrakh hand-block printing in Gujarat’s Kutch region. This matters because both livelihoods depend on natural materials and weather conditions, so delays and damaged inputs can reduce output and earnings.
In Dharavi, heavy rain can stop pottery work completely for three or four months. Flooding can disturb soil layers and change clay deposits, adding sand and other impurities. Potters say excessive heat can crack clay, putting product quality at risk.
In Kutch, changing rainfall interrupts repeated washing, dyeing and printing, especially when cloth must dry. Lower groundwater and salty or iron-rich well water also affect dyes and prints. Artisans report inconsistent quality and slower work; experts say additional support will be needed to help them adapt.
How much rain did Mumbai record during this year's monsoon, and how much warmer were its summers in 2014–2023 than in 2001–2010?
Mumbai’s Santacruz weather station recorded 2,442.6mm during the June-to-September monsoon this year, and the city exceeded its average seasonal rainfall quota. That is the rainfall total reported for the station, not a figure for every location in Mumbai.
Separately, a 2024 study by the Centre for Science and Environment found that Mumbai’s average summer temperature was 0.6°C higher in 2014–2023 than in 2001–2010. The comparison is between two ten-year periods, rather than a single summer or one day.
These figures put the reported pressures on artisans in context: heavy rain can halt pottery, while changing weather can disrupt textile drying. Scientists warn that global warming could make Mumbai’s downpours even more intense. The article gives the rainfall total and temperature comparison, but does not quantify how much climate change caused either measurement.
How can flooding and excessive heat change clay and affect the quality of pottery?
Potters rely on clay deposits as their raw material, so changes to the soil can affect what they are able to make. In Mumbai’s Dharavi neighbourhood, artisans say flooding can disturb soil layers and alter the composition of those deposits.
The article identifies one key change: flood-affected clay can contain more sand and other impurities. Those additions can affect the quality of finished products. Potters also report that excessive heat can cause clay to crack, creating another challenge for their work.
Together, these weather pressures can affect both production and income. Heavy rain already brings pottery work to a complete halt for three or four months, according to the Dharavi Potters Association’s secretary. The article does not describe a specific technical fix for clay damage. It does say experts believe more measures will be needed to help traditional artisans adapt to changing environmental conditions.
What is Ajrakh printing, and why does making it depend on suitable weather?
Ajrakh is a centuries-old form of hand-block textile printing practised in Gujarat’s Kutch region. Artisans create intricate patterns through repeated washing, dyeing and printing. The work is a livelihood for craftspeople, so delays or inconsistent results can affect both their output and income.
Making an Ajrakh textile can take more than two weeks and requires large amounts of water. The cloth must also dry at several stages of production. When rainfall varies, these drying stages can be disrupted, delaying the process and slowing output.
Artisan Ismail Khatri says changing climate conditions make it harder to achieve consistent results and meet customers’ expectations. He contrasts this with the past, when artisans could work without worrying about climatic conditions. Falling groundwater levels create another challenge in the region, and water quality can affect dyes and finished prints. Experts say more support will be needed to help artisans adapt.
How can falling groundwater levels and salty or iron-rich water affect textile dyes and finished prints?
Falling groundwater levels are creating a water-quality challenge for textile printers in Gujarat’s Kutch region. Some craftsmen have had to dig deeper wells, but the water they find can have high salt and iron content. Ajrakh printing needs large amounts of water for its repeated production stages.
Artisan Ismail Khatri says the salty and iron-rich water affects dyes and the quality of finished prints. The article does not specify the precise chemical process or describe which dye colours are affected. It does report that the water problem contributes to difficulties achieving consistent results.
Khatri says artisans have struggled to produce the quality of materials customers expected, and changing weather also disrupts drying stages. Falling groundwater and variable rainfall therefore compound the pressures on the craft. The article gives no specific water-treatment solution, but experts say more measures will be needed to help traditional artisans adapt to changing environmental conditions.
Why are traditional artisans especially vulnerable to changing weather?
Traditional artisans are especially vulnerable because their livelihoods depend heavily on natural materials and weather conditions. When rainfall, heat or water availability changes, it can disrupt the materials and working conditions their crafts require. That leaves their production and income exposed to environmental shifts.
Many artisans work from home or in informal settings. Deepa Bhatia of Ek Kutumb Solutions says India does not necessarily have a strong culture of dedicated workshops for artisans and craftspeople. She notes that home working conditions may already be less than ideal, even before climate stress adds to the difficulty.
The examples in the article show how those risks affect work: heavy rain stops pottery in Dharavi, while variable rainfall disrupts drying for Ajrakh printers in Kutch. Falling groundwater can also affect textile dyes. India has support programmes, including PM Vishwakarma, but experts say more measures will be needed to help artisans adapt to changing environmental conditions.
What is climate change, and how can a warmer atmosphere contribute to heavier rainfall and more extreme heat?
Climate change refers to long-term shifts in average temperatures and weather patterns. The article focuses on warming and increasingly erratic weather affecting artisans. It reports that scientists warn global warming could make Mumbai’s very heavy downpours even more intense, but does not explain the underlying physics.
Established climate science links recent global warming mainly to human-caused greenhouse gas emissions. A warmer atmosphere can hold more water vapour, which can contribute to heavier rainfall when storms form and the moisture is available. Warming also raises average temperatures, increasing the likelihood or severity of extreme heat, though local rainfall patterns vary.
The article describes conditions relevant to both crafts: Mumbai has seen a rise in extremely heavy rainfall events, and a study found its average summer temperature was higher in 2014–2023 than in 2001–2010. Potters report rain-related work stoppages and heat-related clay cracking. These changes matter because artisans depend on weather and natural materials.
This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.
Read more in the JupiteX app
Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.
Or read more news on the web