Ultracold diamond microwave laser amplifies quantum signals 1,000-fold
A maser is a microwave laser: it amplifies microwave signals through stimulated emission, the process also used by optical lasers. The OIST team built a spin-based maser using a special diamond. It operates near absolute zero and is designed to amplify quantum signals while adding very little noise. The diamond contains nitrogen impurities called P1 centers. A weak microwave field pumps most of their electron spins into a higher-energy state. When a signal enters, it triggers excited spins to release energy, amplifying the signal at the same frequency. The device achieved more than 1,000-fold amplification. This matters because quantum computers must detect extremely weak microwave signals to read qubits. The maser adds 2.55 quanta of noise, near the stated quantum limit of 0.5, and can handle stronger inputs than conventional Josephson parametric amplifiers. Solid-state masers can also operate in magnetic fields. The device is undergoing further development toward commercialization.
What is a maser, and what did the OIST team build with one?
A maser is a microwave laser: it amplifies microwave signals through stimulated emission, the process also used by optical lasers. The OIST team built a spin-based maser using a special diamond. It operates near absolute zero and is designed to amplify quantum signals while adding very little noise.
The diamond contains nitrogen impurities called P1 centers. A weak microwave field pumps most of their electron spins into a higher-energy state. When a signal enters, it triggers excited spins to release energy, amplifying the signal at the same frequency. The device achieved more than 1,000-fold amplification.
This matters because quantum computers must detect extremely weak microwave signals to read qubits. The maser adds 2.55 quanta of noise, near the stated quantum limit of 0.5, and can handle stronger inputs than conventional Josephson parametric amplifiers. Solid-state masers can also operate in magnetic fields. The device is undergoing further development toward commercialization.
How much can the diamond maser amplify a microwave signal, and how much noise does it add?
The OIST diamond maser can amplify microwave signals by more than 1,000-fold. It adds 2.55 quanta of noise, according to the article. That is a little above the stated absolute quantum limit of 0.5, so the device amplifies strongly while keeping added noise close to the minimum described.
The amplifier uses electron spins in nitrogen impurities, called P1 centers, inside a special diamond. A weak microwave field puts most spins into a higher-energy state. Incoming microwave signals prompt those excited spins to release energy, amplifying the signal at its original frequency. The researchers were surprised by how much amplification they achieved with little microwave power.
Low added noise matters because quantum computers need to detect very weak signals to determine qubit states. The article says the maser can also handle much stronger input than conventional Josephson parametric amplifiers and operate in magnetic fields. It is being developed further toward commercialization, though the article gives no commercial release date.
Why does adding less noise help a quantum computer read a qubit more accurately?
A qubit’s information can be carried by an extremely weak microwave signal. If an amplifier adds noise, that background can mask the signal, much like hiss makes a quiet voice harder to hear. The article says this can make it more difficult to determine a qubit’s state accurately from a single measurement and can produce errors.
For example, reading quantum information is compared with listening to one microphone in a busy room. Turning up the gain may make distant voices louder, but it also makes the recording equipment’s hiss more noticeable. In a quantum computer, the amplifier’s noise can then travel through later amplification stages, further obscuring the original signal.
The diamond maser adds 2.55 quanta of noise, which the article describes as only slightly above the absolute quantum limit of 0.5. Keeping noise low helps separate the true signal from the amplifier’s contribution. The device is intended as a robust option for reading quantum signals, including in magnetic fields, but the article does not report a measured reduction in qubit-reading errors.
How do spins around nitrogen impurities in the diamond amplify incoming microwave signals?
The OIST device uses electron spins, the electrons’ intrinsic magnetic states, inside nitrogen impurities in a special diamond. These impurities are called P1 centers. The spins provide the energy source that lets the maser amplify an incoming microwave signal.
First, a relatively weak microwave field pumps most of the spins into a higher-energy state. When a microwave signal enters, it triggers excited spins to release energy. The released energy amplifies the incoming signal at the same frequency. The researchers reported more than 1,000-fold amplification, achieved with a small amount of microwave power.
This spin-based design also helps the device work in magnetic fields, which matter for some quantum-computing platforms, including semiconductor-based spin qubits. The maser adds 2.55 quanta of noise, near the stated 0.5 quantum limit, and can handle stronger input than conventional Josephson parametric amplifiers. OIST is continuing development toward commercialization; the article does not give a timeline.
What limits conventional quantum amplifiers, and how does the diamond maser address those limits?
Quantum amplifiers face several trade-offs. Conventional Josephson parametric amplifiers can saturate when reading multiple qubits at once. Kinetic inductance parametric amplifiers can accept stronger signals, but typically need more electrical power and extra wiring. Some quantum platforms also require magnetic fields that can overwhelm conventional superconducting amplifiers.
The OIST team built a solid-state maser around electron spins in nitrogen impurities inside diamond. It amplifies signals more than 1,000-fold, adds 2.55 quanta of noise, and handles much stronger input than conventional Josephson parametric amplifiers. Like most solid-state masers, it operates in a magnetic field, making it compatible with spin-qubit platforms.
The device offers a combination of low noise, stronger input handling, and magnetic-field compatibility that addresses several challenges. However, the article does not claim it solves every trade-off: it does not report its wiring needs or compare its power use with kinetic inductance amplifiers. It is undergoing further development toward commercialization, with practical quantum-computing and sensing applications as potential goals.
Why were masers invented before lasers, and how do both technologies use stimulated emission?
The article gives the timeline: masers were first demonstrated in 1954, six years before the more famous successor, the laser. It does not explain why masers were invented first. As general historical context beyond the article, masers work at microwave frequencies, which were more accessible to early researchers and equipment than the optical frequencies used by lasers.
The shared principle is stimulated emission. If an incoming photon has energy matching the difference between an electron’s excited and ground states, it can trigger the release of another identical photon. Repeating this process amplifies radiation. The key difference in the article’s description is the kind of radiation: masers emit microwaves, while lasers emit light.
The OIST device revisits this older technology for quantum applications. Its diamond and electron spins amplify microwave signals more than 1,000-fold while adding 2.55 quanta of noise. It can operate in magnetic fields, a useful feature for spin-qubit platforms. The device is undergoing further development toward commercialization, but the article does not provide a launch date.
Why can’t an amplifier increase a quantum signal without adding any noise?
The article says the diamond maser’s added noise is close to the minimum required by the laws of physics, and gives the absolute quantum limit as 0.5 quanta. It does not explain the underlying reason. In established quantum physics, the minimum applies to a phase-preserving amplifier that must amplify an unknown signal while preserving its information.
Such a signal has two components, or field quadratures, that must both be handled. Quantum rules prevent an amplifier from perfectly boosting both components without adding uncertainty. In this setting, the standard minimum added noise is half a quantum, when expressed in the convention used for the article’s limit. This does not mean every kind of amplifier has the same limit.
The OIST maser adds 2.55 quanta, slightly above that 0.5-quantum limit, while amplifying signals more than 1,000-fold. Lower added noise helps keep the original signal distinguishable from the amplifier’s contribution. The device is being developed toward commercialization, but the article does not say it has reached the quantum limit or eliminate noise altogether.
This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.
Read more in the JupiteX app
Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.
Or read more news on the web