Almost 90% of Europe’s Battery Production at Risk from Franco-German Car Deal
The deal sets minimum shares of EU-made battery cells for eligible cars sold in the EU. These local-content rules matter because they can steer demand toward European factories and help anchor manufacturing and jobs in Europe. The required share is 10% in 2028–2029, 20% in 2030–2031, and 70% from 2032. For comparison, more than 50% of cells in electric cars sold in the EU are already made in Europe, according to T&E’s analysis. The deal’s early requirements would therefore secure less than the market already does. T&E estimates that, in 2030, the deal would secure cell production equivalent to around 0.9 million electric cars. Under a stricter Made-in-EU approach in the Industrial Accelerator Act, it estimates the equivalent would be 4.6 million. The rules matter especially because much of Europe’s planned 2030 capacity is at plants that have not yet started production.
What battery-cell rules does the Franco-German deal propose for cars sold in the EU?
The deal sets minimum shares of EU-made battery cells for eligible cars sold in the EU. These local-content rules matter because they can steer demand toward European factories and help anchor manufacturing and jobs in Europe.
The required share is 10% in 2028–2029, 20% in 2030–2031, and 70% from 2032. For comparison, more than 50% of cells in electric cars sold in the EU are already made in Europe, according to T&E’s analysis. The deal’s early requirements would therefore secure less than the market already does.
T&E estimates that, in 2030, the deal would secure cell production equivalent to around 0.9 million electric cars. Under a stricter Made-in-EU approach in the Industrial Accelerator Act, it estimates the equivalent would be 4.6 million. The rules matter especially because much of Europe’s planned 2030 capacity is at plants that have not yet started production.
How much of Europe’s planned battery-cell production would the deal secure in 2030, compared with a stricter Made-in-EU rule?
The comparison is about how much European battery-cell production local-content rules would support. T&E says the Franco-German deal would secure only 13% of Europe’s planned cell production in 2030. That matters because factories need reliable demand as Europe tries to build a homegrown battery industry.
T&E translates the deal’s 2030 cell-production support into around 0.9 million electric cars. With a Made-in-EU Industrial Accelerator Act, the equivalent would be 4.6 million. The deal sets EU-cell requirements at 20% of eligible vehicles in 2030–2031, while T&E argues that a stricter local-content scope would direct more demand to European suppliers.
These are estimates, not a count of cars already produced. The analysis comes as many European cell factories are only beginning to ramp up, and most planned 2030 production is expected from plants not yet in production. T&E warns that weaker rules could leave future capacity without the same demand boost.
How could weaker car CO₂ targets reduce demand for batteries made in Europe?
Car CO₂ standards shape the pace at which carmakers must reduce emissions, and that affects demand for electric vehicles and their batteries. The article says EU Parliament proposals to weaken those standards would reduce cell demand. Lower demand can leave European battery makers with fewer orders to support production.
T&E estimates the proposed weakening would cut cell demand by 247 GWh between 2027 and 2032. It equates that amount to approximately 3.7 million EU-made electric cars. The article compares the lost demand with almost three times the annual capacity of LG Energy Solution’s plant in Poland, Europe’s largest battery plant.
This would add to the risk from weak Made-in-Europe requirements, which could direct demand to foreign suppliers. Many European factories expected to supply the market by 2030 have not yet entered production. T&E calls for no further weakening of car CO₂ standards, arguing that stable demand is important for Europe’s battery industry.
Which European battery factories could be at risk if demand or investment falls?
European cell factories need demand and investment to move from plans and early ramp-up into sustained production. The article warns that the Franco-German deal and weaker car CO₂ targets could weaken the market support that European producers need. It does not say that any named factory has closed or will certainly fail.
The factories it identifies are Lyten, formerly Northvolt, in Sweden; PowerCo Salzgitter in Germany; and Verkor Dunkirk in France. The concern is especially relevant because many cell factories are only just beginning to ramp up. Most EU production expected by 2030 is forecast to come from plants that have not yet entered production.
T&E says the future of these plants could be jeopardised by the deal. It argues that weaker local-content incentives and reduced demand would risk handing the battery market to foreign competitors. The article gives no factory-specific financial forecasts, but calls on EU leaders to keep the Commission’s battery requirements and avoid further weakening car CO₂ standards.
Why can allowing more free-trade partners to count toward local-content rules shift battery production away from Europe?
Local-content rules are meant to steer demand toward production in Europe. But if products from many free-trade partners count as local enough, carmakers can meet the rules using suppliers outside Europe. T&E warns that this can reduce the demand available to European battery producers.
The mechanism is that low-cost countries can absorb demand before European factories get orders. T&E estimates that around 100 GWh of cell demand, equivalent to approximately 1.5 million electric cars, is at risk of leakage in 2030. It also estimates that 250 GWh of cathode active material demand could leak abroad. The article links this risk to a wide free-trade-partner scope.
T&E argues for a strict Made-in-EU scope or, at most, a narrow list of trusted partners: the EU27, European Economic Area, and UK. That matters as many European plants have yet to start production. The rules could influence whether future demand supports those plants or suppliers elsewhere.
Why do battery-cell and cathode-material producers need large, stable contracts before they can expand production?
Cathode active material is a key battery component, and its producers need dependable demand before expanding production. The article says they need large, stable contracts with cell makers and carmakers before they can ramp up. This matters because producing components at greater scale depends on having buyers for the output.
The Industrial Accelerator Act could help create that demand through local-content requirements. Under a strict Made-in-EU scope, T&E says cathode-material requirements are reachable by 2030, with only limited supply from trusted partners. From 2032, EU production alone could cover demand, according to the analysis. The proposed Act would create 323 GWh of additional demand for cathode active material.
T&E says total EU-made cathode active material could then reach 407 GWh, securing 94% of expected EU supply. Those are projections, not current production figures. The article’s point is that stable demand and contracts could support expansion in Europe’s battery supply chain, while a broad partner scope risks demand shifting to lower-cost countries.
What are battery cells and cathode active materials, and how do they fit into an electric-car battery pack?
The article treats cells and cathode active material as connected parts of the battery supply chain, but it does not define them. In standard battery terminology, a cell is an individual unit that stores and releases electrical energy through chemical reactions. Several cells are combined into a battery pack used in an electric car.
The cathode is one of the electrodes inside a cell. Cathode active material, often shortened to CAM, is the material in that electrode that participates in the cell’s chemical reactions. It is not the whole cell or the whole pack. The article emphasizes that cell makers and carmakers are important buyers for CAM producers.
This distinction matters because Europe needs more than cell factories to build a battery value chain. T&E says CAM producers need large, stable contracts before they can ramp up. It estimates that a strict Made-in-EU approach could raise total EU-made CAM to 407 GWh by 2032 and secure 94% of expected EU supply. These technical definitions use established battery terminology beyond the article’s wording.
This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.
Read more in the JupiteX app
Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.
Or read more news on the web