JupiteX Get the app
Science & Technology20 Nov 2026 · about 7 min

The Large Hadron Collider is being taken apart to fit magnets that have never run in an accelerator before

The brief

The inner triplets are groups of superconducting quadrupole magnets positioned near the collision points. Their job is to focus the proton beams just before the beams meet. The name “triplet” refers to the magnet grouping; the article describes them as magnets that squeeze the beams. They are a key part of how the LHC delivers collisions to its experiments. The new quadrupoles have a 150 mm aperture, compared with 70 mm in the magnets being removed. The wider opening gives a beam room to swell as it passes through the triplet. The magnets then focus it into a smaller spot where protons meet. That tight focusing is central to increasing the number of collisions. CERN is removing 28 superconducting magnets around ATLAS and CMS, including the inner triplets, during the LHC shutdown. The replacements use Nb3Sn and are part of the High-Luminosity LHC upgrade. The upgraded collider is scheduled to start in June 2030, with the goal of increasing collisions per bunch crossing from about 60 to between 140 and 200.

01

What are the LHC’s “inner triplet” quadrupole magnets, and what do they do just before protons collide?

The inner triplets are groups of superconducting quadrupole magnets positioned near the collision points. Their job is to focus the proton beams just before the beams meet. The name “triplet” refers to the magnet grouping; the article describes them as magnets that squeeze the beams. They are a key part of how the LHC delivers collisions to its experiments.

The new quadrupoles have a 150 mm aperture, compared with 70 mm in the magnets being removed. The wider opening gives a beam room to swell as it passes through the triplet. The magnets then focus it into a smaller spot where protons meet. That tight focusing is central to increasing the number of collisions.

CERN is removing 28 superconducting magnets around ATLAS and CMS, including the inner triplets, during the LHC shutdown. The replacements use Nb3Sn and are part of the High-Luminosity LHC upgrade. The upgraded collider is scheduled to start in June 2030, with the goal of increasing collisions per bunch crossing from about 60 to between 140 and 200.

02

Why is CERN replacing the old NbTi magnets with larger-aperture Nb3Sn magnets?

CERN is replacing its old niobium-titanium, or NbTi, focusing magnets with niobium-tin, or Nb3Sn, quadrupoles. The upgrade is designed to make the High-Luminosity LHC produce more proton collisions. To do that, the collider needs to focus beams more strongly at the collision points. Nb3Sn can keep working in far stronger magnetic fields than the NbTi used in the original LHC magnets.

The new quadrupoles have a 150 mm aperture, while the magnets being removed have a 70 mm aperture. That larger bore leaves room for the beam to swell as it travels through the inner triplet. The magnets can then focus the beam into a smaller spot where protons meet. Tighter focusing supports the upgrade’s goal of raising collisions per bunch crossing from about 60 to 140–200.

There is a manufacturing trade-off. NbTi is ductile and can be drawn like copper wire, while Nb3Sn becomes brittle and strain-sensitive after it forms. CERN’s teams are installing 28 replacement magnets as part of the upgrade. The High-Luminosity LHC is scheduled to start in June 2030, about a year later than originally planned.

03

How much more collision activity is the High-Luminosity LHC designed to produce, and what share of the new coils have been rejected?

The High-Luminosity LHC is designed to produce many more proton collisions in each bunch crossing: between 140 and 200, compared with about 60 today. Increasing collision activity gives scientists more opportunities to observe particle interactions. The upgrade depends on focusing beams more tightly at the collision points, which is why CERN is replacing the LHC’s old focusing magnets with larger-aperture Nb3Sn quadrupoles.

The new quadrupoles have a 150 mm aperture, up from 70 mm in the magnets being removed. This wider bore gives the beam room to swell as it passes through the inner triplet, allowing the magnets to focus it to a smaller spot where protons meet. The target is greater collision activity, not simply a larger opening by itself.

Coil production has also involved substantial rejects. Across the program, 250 coils were produced and 25 failed because of human error or substandard electrical or mechanical properties. That is a 10% rejection rate, or one coil in ten. The reported yield of about 90% is close to the 89% reported by the US side after its first 110 coils in 2024.

04

How can having more proton collisions help scientists discover rare events?

Rare events are hard to observe because they do not happen in every proton collision. Increasing the number of collisions gives scientists more chances for one of those uncommon interactions to occur. That is the basic reason the High-Luminosity LHC is designed to raise collision activity: more opportunities can mean more observations of events that would otherwise be missed.

CERN’s target is to increase the number of proton collisions in each bunch crossing from about 60 today to between 140 and 200. The new inner-triplet quadrupoles help by focusing the beams harder at the collision points. Their 150 mm aperture, compared with 70 mm for the old magnets, gives the beam room to swell through the triplet before it is focused into a smaller spot.

More collisions also mean more data for the laboratory to handle. The article notes that CERN passed an exabyte of storage capacity in 2023 and already runs more than 120,000 hard drives in its central data center. The High-Luminosity LHC is scheduled to start in June 2030. The article links the increased collision rate to more chances to catch rare events and a larger volume of data.

05

Why is Nb3Sn difficult to turn into magnet coils, and how does the “wind-and-react” process work?

Nb3Sn is difficult to make into coils because it forms only at around 650 °C and becomes brittle and strain-sensitive once formed. Unlike ductile NbTi, it cannot be drawn and handled like copper wire. The article says winding a finished Nb3Sn superconductor is therefore not practical. This makes the replacement magnets challenging to manufacture and helps explain why CERN tracks coil failures carefully.

The process is called “wind-and-react.” In established magnet-making practice, manufacturers wind precursor material into the required coil shape first, then heat-treat it so the Nb3Sn compound forms in place. This explanation of the process sequence is general background; the article names the method but does not describe its individual production steps. The key idea is to shape the coil before the brittle superconducting compound forms.

Across the program, 250 coils were produced and 25 were rejected for human error or inadequate electrical or mechanical properties. A suspected metal particle led to one coil being scrapped. The resulting 90% yield is close to the US side’s 89% after its first 110 coils in 2024. These coils are for accelerator-quality magnets, which CERN says are new at this length.

06

What is superconductivity, and why does it help a magnet create a powerful magnetic field?

Superconductivity is a state in which a material carries electrical current with essentially no electrical resistance, provided conditions such as temperature and magnetic field are within its limits. That definition is standard physics background; the article does not explain the phenomenon itself. It does describe superconducting materials as the basis of the LHC’s focusing magnets and contrasts how NbTi and Nb3Sn behave in strong fields.

A magnet’s field comes from electric current flowing through its coils. With very little resistance, a superconducting coil can carry a large current without the usual resistive energy loss, helping create a powerful magnetic field. The article’s practical comparison is that Nb3Sn keeps working in far stronger magnetic fields than the NbTi used in the original LHC. Its brittleness after formation makes coil production difficult.

CERN is installing Nb3Sn quadrupoles as part of the High-Luminosity LHC upgrade. The new magnets have a 150 mm aperture, compared with 70 mm in the old magnets, and are intended to focus beams more strongly. The collider aims to increase collisions per bunch crossing from about 60 to between 140 and 200. It is scheduled to start in June 2030.

07

What are protons, and why do particle physicists accelerate and collide them?

Protons are positively charged subatomic particles found in the nuclei of atoms. This is established physics background; the article refers to proton beams but does not define protons. In a collider, accelerating charged particles and guiding them with magnets lets researchers bring beams into collision. Studying what happens in those collisions helps particle physicists investigate interactions and search for unusual outcomes.

The article focuses on how the LHC’s inner-triplet quadrupoles squeeze proton beams just before they collide. The replacement magnets have a 150 mm aperture, compared with 70 mm in the old magnets. That wider bore gives the beam room to swell as it passes through the triplet, so the magnets can focus it into a smaller spot where protons meet. The article connects more collisions with more chances to catch rare events.

The High-Luminosity LHC aims to increase collisions in each bunch crossing from about 60 to between 140 and 200. CERN is replacing 28 superconducting magnets, including the inner triplets, with Nb3Sn quadrupoles. The upgrade is scheduled to start in June 2030. More collisions also mean more data for a laboratory whose central data center already runs more than 120,000 hard drives.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web