JupiteX Get the app
Space20 Nov 2026 · about 7 min

Voyager 1 stops sending science data ahead of its light-day milestone — but NASA has a plan

The brief

Voyager 1 has stopped sending science data back to Earth because of a glitch that likely involves its onboard computer. That computer gathers information from the science instruments and prepares it for transmission in a readable format. The interruption matters because the spacecraft is still exploring interstellar space, but its latest measurements are not reaching scientists. The team can still detect a carrier signal, which NASA describes as being used to ferry science and engineering information between the probe and Earth. Detecting it shows that Voyager 1 is powered up and pointed in the right direction. The signal does not mean the science data stream is working: the team had not recovered that data by Nov. 19. NASA is tackling the problem using the same approach as a similar computer-related issue. That earlier interruption lasted from November 2023 until engineers solved it in June 2024. If the new fix works, the spacecraft can resume sending readings from its two remaining science instruments. Its great distance and aging hardware make the work slow.

01

What science data has Voyager 1 stopped sending to Earth, and what signal is it still transmitting?

Voyager 1 has stopped sending science data back to Earth because of a glitch that likely involves its onboard computer. That computer gathers information from the science instruments and prepares it for transmission in a readable format. The interruption matters because the spacecraft is still exploring interstellar space, but its latest measurements are not reaching scientists.

The team can still detect a carrier signal, which NASA describes as being used to ferry science and engineering information between the probe and Earth. Detecting it shows that Voyager 1 is powered up and pointed in the right direction. The signal does not mean the science data stream is working: the team had not recovered that data by Nov. 19.

NASA is tackling the problem using the same approach as a similar computer-related issue. That earlier interruption lasted from November 2023 until engineers solved it in June 2024. If the new fix works, the spacecraft can resume sending readings from its two remaining science instruments. Its great distance and aging hardware make the work slow.

02

What is a carrier signal, and how can it show that Voyager 1 is still powered on and pointed toward Earth?

A carrier signal is the radio signal a spacecraft uses to communicate with Earth. In this case, NASA says it is used to ferry science and engineering information from Voyager 1. The team detected that signal even after the probe stopped sending science data, so the communication link was not entirely silent.

The signal matters because Earth could receive it from Voyager 1. NASA said this confirmed that the spacecraft was still powered up and pointed in the right direction. It also let the team confirm the probe’s distance milestone. But a detected carrier signal does not mean all onboard systems are working: the science data stream was still interrupted.

As of Nov. 19, the team had not fixed the glitch, which likely stems from the onboard computer that collects and formats instrument data. The carrier gave engineers evidence that the spacecraft remained reachable while they worked on the problem. Because radio signals take a day to travel each way at this distance, troubleshooting is slow.

03

How far away is Voyager 1 at one light-day, and how long does a radio signal take to travel between it and Earth?

One light-day is the distance light travels in 24 hours. Voyager 1 reached that milestone on Wednesday, Nov. 18, becoming the first human-made object to get so far from Earth. NASA gave its distance as roughly 16.1 billion miles, or 25.9 billion kilometers. The milestone is a striking measure of how far the nearly 50-year-old spacecraft has traveled.

Radio signals travel at the speed of light, so it takes a full 24 hours for a signal to go from Earth to Voyager 1. The return journey takes another 24 hours. This long delay also affects how quickly the mission team can communicate with the probe and assess problems.

Voyager 1’s twin, Voyager 2, is expected to reach its own one-light-day distance in 2035. Meanwhile, Voyager 1 has stopped sending science data, although its carrier signal remains detectable. The team can use that signal to confirm the spacecraft’s distance and that it is powered and pointed in the right direction, but fixing the data problem still takes time.

04

Why does Voyager 1’s distance mean that diagnosing a problem can take at least two days?

Voyager 1 is so far away that even a radio message traveling at the speed of light takes a full 24 hours to reach it from Earth. A reply or returning signal needs another 24 hours. That round-trip delay is why the mission team cannot quickly send a command and learn what happened.

For example, diagnosing a spacecraft problem can involve sending information or instructions, then waiting for a response. At one light-day, that exchange takes about two days just for signals to travel both directions. Voyager project manager Suzanne Dodd said, “It takes two days to diagnose anything with the spacecraft.” She also noted that data rates are very low.

The distance is only part of the challenge. Voyager 1 is nearly 50 years old, so its hardware is aging too. NASA’s team had not resolved the latest science-data interruption as of Nov. 19, but was using an approach similar to one used for a previous computer problem. Dodd said the team expects more anomalies as the spacecraft grows older and remains far away.

05

What part of Voyager 1’s onboard computer may be causing the glitch, and how did engineers fix a similar problem before?

NASA says the current glitch likely stems from Voyager 1’s onboard computer. That computer gathers data from the science instruments and transmits it to Earth in a readable format. If it fails to handle that work correctly, the probe can remain powered and detectable while science data no longer reaches the mission team.

Engineers faced a similar problem in November 2023, when Voyager 1 stopped sharing science data. They solved that issue in June 2024. The article does not give the technical details of that repair, but NASA says the team is approaching the new glitch in the same way it handled the previous one. The earlier episode shows that recovery can take months.

As of Thursday, Nov. 19, the new issue was not resolved. The spacecraft’s distance means it takes two days to diagnose a problem, and its data rates are low. If the fix succeeds, Voyager 1 can resume sending data from its two remaining science instruments. The team has not said when that will happen.

06

What do Voyager 1’s remaining instruments measure in interstellar space?

Voyager 1 has two remaining science instruments that could resume sending readings if the current fix succeeds. They examine different parts of the spacecraft’s environment beyond the solar system. Their measurements help scientists learn about interstellar space, where the probe has been traveling since it officially reached that region in 2012.

One instrument is a magnetometer, which measures magnetic fields in interstellar space. The other is a plasma wave detector, which measures charged particles in the interstellar medium. These are not the same measurement: one tracks magnetic fields, while the other detects charged particles. NASA’s team shut off some instruments earlier in the year to conserve power and powered other, more efficient ones.

The two instruments are among the data sources Voyager 1 may continue using if engineers restore the science-data stream. The spacecraft’s age and distance make the repair difficult, and NASA had not resolved the glitch as of Nov. 19. A power-conservation maneuver is intended to keep the probe operating through at least 2027, but the article says it will eventually run out of power.

07

What is the interstellar medium, and how does it differ from the space within our solar system?

The article defines the interstellar medium as the space between stars. Voyager 1 officially reached interstellar space in 2012, and the probe continues to study this environment. It is an important setting for the mission because the article says only Voyagers 1 and 2 have ever been there.

The spacecraft’s remaining instruments examine parts of that environment: its magnetometer measures magnetic fields, and its plasma wave detector measures charged particles. These measurements let Voyager 1 gather information about the region beyond the solar system. The article does not describe the detailed boundary or physical differences between that region and space within the solar system.

In standard space-science usage, the key distinction is location: the interstellar medium lies between stars, beyond the Sun’s solar-system environment. Voyager 1’s passage into interstellar space therefore marked a change in the region it was exploring. Its science-data transmission is currently interrupted, but if engineers fix the glitch, it can continue sending readings from its two remaining instruments.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web