JupiteX Get the app
Science & Technology21 Nov 2026 · about 6 min

Theory explains how fusion plasmas enter a state of improved energy confinement, solving a 40-year puzzle

The brief

In a tokamak, plasma can lose heat as turbulence carries energy away. L-mode is the low-confinement state. When heating power passes a threshold, the plasma can make a sudden transition to H-mode, or high-confinement mode. This matters because better energy retention helps maintain the conditions needed for fusion. The change is marked by a sharp drop in turbulence near the plasma’s edge. The EPFL team’s theory explains that turbulence generates flows moving at different speeds across this outer region. Differences in flow speed help suppress the turbulence, so less heat escapes and the plasma retains energy more effectively. Researchers first discovered the transition in 1982, but its power threshold has been difficult to predict. The new theory accounts for how the threshold varies with density and magnetic-field direction, and was compared with measurements from existing tokamaks. Its predictions can help estimate the operating requirements of future devices, including ITER and SPARC.

01

What is the transition from L-mode to H-mode in a tokamak?

In a tokamak, plasma can lose heat as turbulence carries energy away. L-mode is the low-confinement state. When heating power passes a threshold, the plasma can make a sudden transition to H-mode, or high-confinement mode. This matters because better energy retention helps maintain the conditions needed for fusion.

The change is marked by a sharp drop in turbulence near the plasma’s edge. The EPFL team’s theory explains that turbulence generates flows moving at different speeds across this outer region. Differences in flow speed help suppress the turbulence, so less heat escapes and the plasma retains energy more effectively.

Researchers first discovered the transition in 1982, but its power threshold has been difficult to predict. The new theory accounts for how the threshold varies with density and magnetic-field direction, and was compared with measurements from existing tokamaks. Its predictions can help estimate the operating requirements of future devices, including ITER and SPARC.

02

What did the new theory explain about the heating power needed to trigger H-mode?

Tokamaks need enough heating power to trigger the transition from L-mode to H-mode, where plasma confines energy more effectively. For decades, researchers had difficulty predicting this threshold. Existing theories did not fully explain together why the threshold changes with plasma density and with the direction of the magnetic field.

A team at EPFL’s Swiss Plasma Center used computer simulations to follow plasma behavior as heating power increased. They identified processes behind the transition, built a mathematical model, and compared its predictions with measurements from existing tokamaks. The resulting theory explains how density and magnetic-field direction affect the power needed to reach H-mode.

The equations predict that the required power increases with density in one regime but decreases in another, producing a density where the heating requirement is lowest. The team says this offers a basis for extrapolating to future experiments. Its calculations estimate minimum heating requirements for ITER and SPARC, helping researchers assess whether planned power capacity can reach H-mode.

03

How do plasma density and magnetic-field direction affect the power threshold?

The H-mode threshold is not fixed: the new theory predicts that its relationship with plasma density changes across operating regimes. In one regime, the required heating power rises as density increases. In another, it falls. Together, these trends create a density at which the heating requirement is lowest.

Magnetic-field direction also changes how readily the transition occurs. The researchers’ calculations show that the field direction acts together with flows inside the plasma and collisions between particles. These combined effects make the transition easier in one magnetic configuration than in the other. The article does not give a numerical threshold for each configuration.

This joint explanation addresses two observations that existing theories had not fully explained at the same time. The team derived equations for how the threshold changes with density and other operating conditions. Those equations provide a basis for predicting power requirements in future experiments, including estimates for ITER and SPARC, although the SPARC estimate is close to its planned capacity.

04

How can flows generated by turbulence help suppress turbulence and reduce heat loss?

Turbulence in tokamak plasma carries heat away, making it harder to keep the plasma in conditions needed for fusion. The EPFL team’s theory describes a way turbulence can help reduce this problem: it generates flows in the plasma’s outer region, and the flows move at different speeds.

The differences in speed help suppress the turbulence itself. As turbulence near the edge drops, less heat escapes, and the plasma retains energy more effectively. This process is part of the transition to H-mode, the higher-confinement state that researchers first identified in 1982. The source does not describe the flows as eliminating turbulence altogether.

The researchers used computer simulations to reproduce plasma behavior as heating power increases, then built a mathematical model and compared it with existing tokamak measurements. Their explanation helps account for the transition and supports estimates of the heating power future devices may need. Better predictions matter because H-mode is important for future reactors such as ITER.

05

How much heating power does the theory predict ITER and SPARC will need, compared with their planned capacities?

The theory predicts that ITER will need at least 43 megawatts of heating power to reach H-mode. Its planned heating capacity is 73 megawatts, so the prediction is below the planned capacity. ITER is the large international fusion experiment under construction in France.

For SPARC, a compact, high-field tokamak being developed by Commonwealth Fusion Systems, the predicted minimum is 26 megawatts. Its planned capacity is 25 megawatts, one megawatt below that estimate. The researchers describe this as leaving considerably less room for uncertainty than in the ITER comparison.

These are predictions from a model, not reported operating results from the future reactors. The team developed equations for how the threshold varies with plasma density and other operating conditions, then compared its model with measurements from existing tokamaks. The findings offer a physics-based way to estimate requirements and assess whether future devices can achieve improved confinement.

06

Why does reaching H-mode matter for keeping fusion plasma hot enough for energy production?

Fusion on Earth requires scientists to heat gas to extreme temperatures, creating plasma. Keeping that plasma hot and stable long enough for fusion energy production is a major challenge. In tokamaks, turbulence carries heat away, making it harder to maintain the necessary conditions.

H-mode is a higher-confinement state that begins when heating power passes a threshold. Turbulence near the plasma edge drops sharply during the transition, so the plasma loses less heat and retains energy more effectively. The EPFL team’s theory links this change to flows moving at different speeds across the plasma’s outer region; those differences help suppress turbulence.

H-mode is essential for future reactors such as ITER, according to the article. Predicting the power needed to reach it can help researchers assess future devices’ operating requirements. The new model estimates that ITER needs at least 43 megawatts, below its planned 73-megawatt capacity, while SPARC’s predicted 26 megawatts is close to its planned 25.

07

What is plasma, and how do tokamak magnetic fields confine it?

Plasma is a charged state of matter formed when scientists heat a gas to extreme temperatures. The article describes making and keeping this hot plasma as a central challenge for fusion on Earth, because fusion energy production requires the plasma to remain hot and stable long enough.

Tokamaks are one approach to confining plasma. They use powerful magnetic fields to keep it inside a doughnut-shaped chamber. Confinement matters because plasma is turbulent: fluctuations can carry heat away and make it difficult to maintain conditions needed for fusion. The article does not give further details about how the magnetic fields are produced.

Researchers study how to improve confinement by moving from L-mode to H-mode. At a certain heating-power threshold, turbulence near the plasma’s edge drops sharply and the plasma retains energy more effectively. The new EPFL theory helps predict that threshold under different operating conditions. This could help assess future fusion devices, including ITER and SPARC.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web