From Wi-Fi challenger to NATO defence technology: Oledcomm's Li-Fi revival
Oledcomm, a French optical wireless communications company, has been selected for the Mission Track of NATO’s Defence Innovation Accelerator for the North Atlantic, known as DIANA. The selection came after the company took part in DIANA’s initial Challenge phase. The programme connection matters because Oledcomm is adapting light-based communications for military environments where radio signals can be detected or jammed. The company’s technology sends data through modulated light rather than conventional radio-frequency transmission. Oledcomm is developing systems for use by military personnel, vehicles, drones and command centres. The company describes its goal as a one-kilometre, radio-frequency-silent “tactical bubble,” using Li-Fi indoors and laser links outdoors. The article does not give details of the Mission Track’s activities or a completion date. It says Oledcomm is using DIANA’s help to apply for NATO Secret accreditation for its products. That accreditation is a next step; the article does not say it has been granted.
What has Oledcomm been selected for in NATO DIANA, and what earlier stage of the programme did it complete?
Oledcomm, a French optical wireless communications company, has been selected for the Mission Track of NATO’s Defence Innovation Accelerator for the North Atlantic, known as DIANA. The selection came after the company took part in DIANA’s initial Challenge phase. The programme connection matters because Oledcomm is adapting light-based communications for military environments where radio signals can be detected or jammed.
The company’s technology sends data through modulated light rather than conventional radio-frequency transmission. Oledcomm is developing systems for use by military personnel, vehicles, drones and command centres. The company describes its goal as a one-kilometre, radio-frequency-silent “tactical bubble,” using Li-Fi indoors and laser links outdoors.
The article does not give details of the Mission Track’s activities or a completion date. It says Oledcomm is using DIANA’s help to apply for NATO Secret accreditation for its products. That accreditation is a next step; the article does not say it has been granted.
What is Li-Fi, and how does it use light to send data?
Li-Fi, short for Light Fidelity, is an optical wireless communication technology. It transmits data by rapidly changing light, including light from infrared LEDs. Instead of relying on conventional radio-frequency transmission, it uses a light source and a dedicated optical receiver. This can provide wireless connectivity in places where radio emissions or signal spread are concerns.
In Oledcomm’s system, an optical access point sends a modulated light signal to a receiver. The receiver reads the changes and uses them to recover data. The signal is largely confined to the illuminated area, which may be useful in sensitive settings. Oledcomm also uses laser-based optical links for longer-distance communication, including between vehicles, drones and satellites.
Li-Fi has not replaced Wi-Fi for everyday consumers. Oledcomm is now focusing on defence and space, where avoiding radio-frequency emissions can matter. Its military concept combines indoor Li-Fi with outdoor lasers. Optical links still depend on an unobstructed path between the sender and receiver.
Why can radio communications make troops or vehicles easier for an enemy to detect, locate, or disrupt?
Conventional radio communications can expose troops and equipment because transmitting a radio signal creates an emission that electronic-warfare systems may detect. In the battlefield example given by Oledcomm CEO Benjamin Azoulay, an enemy could use those emissions to locate a communicating unit and attack it. The risk is not only interception: a detected position can help direct an attack.
Azoulay said enemy systems can take seconds to detect a radio transmission and geolocate its source, potentially followed by a strike from an FPV drone. Radio links may also be disrupted through jamming. Those risks make communication difficult: forces need to stay connected, but transmitting can reveal where they are.
Oledcomm’s proposed alternative uses light, which avoids conventional radio-frequency emissions and is described in the article as immune to jamming. That does not mean every optical link works in every situation: its performance depends on an unobstructed path. The company is developing these systems for military use, where reducing radio visibility is a key goal.
What distances and data speeds do Oledcomm's vehicle, drone, and satellite links aim to support?
The article gives a specific range and speed for Oledcomm’s CLOVIS vehicle-to-vehicle system: up to one kilometre and 1 Gbps. It describes CLOVIS as a mesh networking system for connecting military vehicles. Those figures are the clearest published targets in the provided text for links between mobile platforms.
For longer-distance communication, Oledcomm uses laser-based optical links, including links between vehicles, drones and satellites. But the article does not state exact distances or data speeds for drone-to-drone-to-satellite or satellite connections. It would therefore be inaccurate to apply CLOVIS’s one-kilometre range or 1 Gbps speed to those links.
The broader concept is a “one-kilometre bubble” for radio-frequency-silent tactical communication. Oledcomm says its approach is lasers outdoors and Li-Fi indoors. The stated CLOVIS figures show one part of that plan, but the article does not provide enough information to judge the range or throughput of the other links or the full network.
Why did Li-Fi fail to replace Wi-Fi for everyday consumers, and what changed to make defence a promising use?
Oledcomm began with the ambition of making LED light fittings into internet access points and bringing Li-Fi into everyday life. But Wi-Fi advanced rapidly, while major chip and device manufacturers focused on cellular technologies rather than Li-Fi. By around 2020 or 2021, CEO Benjamin Azoulay judged mainstream adoption to be years away. The technology did not replace Wi-Fi for consumers.
The company’s direction changed after discussions with the French Ministry of Defence. Electronic warfare, radio-frequency detection and jamming became increasingly prominent concerns, particularly following Russia’s full-scale invasion of Ukraine in 2022. The ministry financed Oledcomm’s first military-grade product. For defence users, avoiding radio-frequency emissions could address a direct battlefield vulnerability.
Oledcomm is now developing optical systems for defence and space rather than relying on mass consumer adoption. The company has been selected for NATO DIANA’s Mission Track after its initial Challenge phase. It is also applying for NATO Secret accreditation with DIANA’s help. The article presents defence as a renewed use for Li-Fi, not as proof that it has become a mainstream technology.
What can interrupt an optical communications link, and why does it need a clear path between sender and receiver?
Optical communication depends on light travelling from a sender to a receiver. If something blocks that route, the receiver may not get the modulated light signal. The article says optical communication avoids conventional radio-frequency emissions, but its performance depends on maintaining an unobstructed optical link. That requirement is a key practical difference from a system that does not rely on a clear light path.
For example, an optical access point sends a signal to a dedicated receiver. If an object interrupts the light between them, the signal cannot follow its intended path to that receiver. Oledcomm also uses lasers for longer-distance links, including between vehicles, drones and satellites; these too depend on a clear optical path.
The article does not name specific objects or conditions that interrupt the link, so it does not establish particular failure scenarios. It does make clear that the path must remain unobstructed. This is one reason optical links are not a universal replacement for radio: their usefulness depends on whether the sender and receiver can maintain that path.
How does changing a light's intensity encode information, and how is that different from sending data with radio waves?
Li-Fi sends data by rapidly modulating light, including light from infrared LEDs. Modulation means deliberately changing a signal in a pattern so a receiver can interpret information. The article describes the light as modulated and says an optical access point sends it to a dedicated receiver. It does not explain the exact coding scheme or how particular intensity changes map to bits.
In general, a light-based system can encode information through rapid changes in light intensity, with a receiver detecting those changes. This is general technical context, not a specific encoding detail supplied by the article. Oledcomm’s description distinguishes the optical link from conventional radio-frequency transmission: the data travels through light rather than radio waves.
The article says the signal is largely confined to the illuminated area and that optical communication avoids conventional radio-frequency emissions. This can matter in sensitive or military settings where radio signals may be detected or jammed. Optical links have a limitation too: they depend on maintaining an unobstructed path between sender and receiver.
This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.
Read more in the JupiteX app
Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.
Or read more news on the web