BepiColombo finally reaches Mercury after eight-year odyssey
BepiColombo’s arrival marks only the second time a mission has entered orbit around Mercury. The first was NASA’s MESSENGER, which orbited the planet from 2011 to 2015. Orbiting matters because a spacecraft can stay near its destination and study it over time, rather than just pass through the area. An orbit is a continuing path around a body, shaped by gravity and the spacecraft’s motion. The spacecraft is not simply hovering in place. Its sideways motion carries it forward as the planet’s gravity curves its path around the planet. Entering orbit means reaching a path that keeps the spacecraft travelling around Mercury. The European Space Agency announced on 21 November that a European-built module had entered Mercury’s orbit. The two scientific probes are still joined and will undergo further manoeuvres before separating. The Japanese MIO and European MPO are set to follow different orbits, allowing them to study different aspects of Mercury. The article describes this as the start of a months-long sequence, not the end of the mission’s orbital adjustments.
What did BepiColombo achieve at Mercury, and what does it mean for a spacecraft to enter orbit?
BepiColombo’s arrival marks only the second time a mission has entered orbit around Mercury. The first was NASA’s MESSENGER, which orbited the planet from 2011 to 2015. Orbiting matters because a spacecraft can stay near its destination and study it over time, rather than just pass through the area.
An orbit is a continuing path around a body, shaped by gravity and the spacecraft’s motion. The spacecraft is not simply hovering in place. Its sideways motion carries it forward as the planet’s gravity curves its path around the planet. Entering orbit means reaching a path that keeps the spacecraft travelling around Mercury.
The European Space Agency announced on 21 November that a European-built module had entered Mercury’s orbit. The two scientific probes are still joined and will undergo further manoeuvres before separating. The Japanese MIO and European MPO are set to follow different orbits, allowing them to study different aspects of Mercury. The article describes this as the start of a months-long sequence, not the end of the mission’s orbital adjustments.
How long did BepiColombo take to reach Mercury, and how many missions had entered orbit there before it?
BepiColombo took eight years to reach Mercury after launching in October 2018. Its arrival is notable because Mercury has had very few orbital visitors: before BepiColombo, only NASA’s MESSENGER had entered orbit there. MESSENGER orbited the planet from 2011 to 2015, making BepiColombo the second mission to do so.
The long trip reflects the challenge of reaching the planet nearest the Sun. Mission scientist Emma Bunce describes travel to the Solar System’s innermost regions as a “prolonged affair.” She says it takes more energy to go to Mercury than to go to the outer Solar System. BepiColombo therefore travelled through a sequence of manoeuvres, gradually lowering itself closer to the Sun.
On 21 November, the European Space Agency announced that a European-built module had entered Mercury’s orbit. This is an initial milestone, not the end of the journey’s adjustments. The two scientific probes are still joined. They are expected to separate after further manoeuvres, then follow their own paths around Mercury at different altitudes.
What will happen to BepiColombo’s two probes next, and why will they follow different orbits?
BepiColombo consists of two scientific probes that are travelling together for now. The article says they will remain conjoined until they reach the prescribed orbit for MIO, the Japanese probe, on 9 December. In the following weeks, the probes are expected to separate so each can follow its own orbit at a different altitude.
MIO is planned to trace elliptical paths between 500 and 11,000 kilometres above Mercury. That orbit is intended for sampling the planet’s magnetic field and how it interacts with the solar wind. The European-built Mercury Planetary Orbiter, or MPO, carries instruments including the MIXS X-ray camera. It will gradually descend toward a lower orbit.
The different paths allow the two craft to focus on different observations rather than sharing one orbital track. The article gives the schedule as a process: MIO reaches its prescribed orbit first, and the MPO continues manoeuvring until March 2027. By then, MPO is expected to reach an orbit between 400 and 1,500 kilometres, where its instruments will continuously study Mercury’s surface.
What will the Japanese MIO and European MPO each study from their orbits?
The Japanese probe, MIO, is designed to examine Mercury’s magnetic environment. From an elliptical orbit between 500 and 11,000 kilometres above the planet, it will sample the magnetic field and how that field interacts with the solar wind. This gives MIO a role focused on the planet’s magnetic surroundings.
The European-built Mercury Planetary Orbiter, or MPO, carries the MIXS X-ray camera among other instruments. After gradually descending, it is due to reach an orbit between 400 and 1,500 kilometres in March 2027. From there, the article says, its instruments will continuously study Mercury’s surface. En route, MIXS was tested by pointing it at the Crab Nebula.
The two probes will follow separate orbits at different altitudes, matching their distinct measurement plans. MIO’s broad elliptical path supports sampling the magnetic field and solar-wind interaction, while MPO’s lower orbit supports ongoing surface study. Together, their observations will cover different parts of Mercury’s environment, although the article does not detail specific findings they are expected to make.
What can continuous measurements from orbit reveal that a brief flyby might miss?
BepiColombo’s two probes are planned to study Mercury from orbit, with MPO’s instruments continuously studying the surface once it reaches its planned orbit. The article does not directly compare orbital observations with a flyby, but the difference in time near the planet helps explain why sustained measurements matter. A spacecraft that stays in orbit can return to observe the planet repeatedly.
For example, a single pass might record the surface or magnetic environment at one moment. In general, repeated measurements can help scientists distinguish a lasting feature from a temporary change and compare observations made at different times. The article specifically says MIO will sample Mercury’s magnetic field and how it interacts with solar wind, while MPO will continuously study the surface.
BepiColombo has only just begun its months-long series of manoeuvres, and its two probes will eventually operate in different orbits. The article does not report results from those future observations. It does establish that the mission is designed for ongoing study, rather than one brief encounter, with each orbiter focused on a different aspect of Mercury.
Why did BepiColombo need years of manoeuvres to reach Mercury instead of simply flying straight toward it?
A straight path toward Mercury would not solve the central challenge described in the article: the spacecraft must get closer to the Sun without gaining speed and overshooting the planet. Mission scientist Emma Bunce says reaching the Solar System’s innermost regions is a “prolonged affair.” She also notes that, energetically, going to Mercury takes more energy than going to the outer Solar System.
BepiColombo launched in October 2018 and spent eight years on its journey. Rather than simply heading directly inward, it gradually lowered itself closer to the Sun. That gradual approach helped the craft avoid gaining too much speed as it moved inward. The article does not give details of each manoeuvre, but says the mission had to make a series of them.
After arriving, the spacecraft still faces months of manoeuvres to establish the planned paths for its two probes. MIO is scheduled to reach its prescribed orbit on 9 December. MPO will gradually descend until March 2027. The long trip and continued adjustments show that reaching Mercury and settling into useful orbits are separate challenges.
How do gravity and orbital energy shape the paths spacecraft must take to reach and orbit planets?
Gravity and orbital energy help determine where a spacecraft goes and whether it can remain near a planet. In general, a spacecraft’s speed and direction, together with a planet’s gravity, shape its path. To orbit a planet, the craft must follow a continuing curved route around it rather than simply pass by. This basic orbital explanation is background knowledge; the article focuses on BepiColombo’s particular journey.
The article says the mission needed to lower itself gradually closer to the Sun without gaining speed and overshooting Mercury. Emma Bunce explains that reaching Mercury takes more energy than travelling to the outer Solar System. Those constraints made the trip a prolonged affair, with manoeuvres rather than a simple direct flight. After arrival, further adjustments are needed to put each probe in its intended orbit.
MIO is to follow an elliptical path between 500 and 11,000 kilometres above Mercury. MPO will descend to an orbit between 400 and 1,500 kilometres by March 2027. These distinct paths let the probes carry out their different study plans: sampling the magnetic field and solar-wind interaction, and continuously studying the surface.
This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.
Read more in the JupiteX app
Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.
Or read more news on the web