JupiteX Get the app
Environment & Climate21 Nov 2026 · about 6 min

How data centres consume water for cooling but also to power their energy needs

The brief

A closed-loop system can keep water use at the data centre low, but it does not erase the water used to make the electricity. A full water account must include both onsite use and the water used by power plants supplying the facility. Bell says its data centre will use sealed, closed-loop cooling with air-cooled heat rejection, without connecting to groundwater or the municipal supply. But 300 megawatts will come from the provincial grid. Saskatchewan’s coal plants use wet and dry cooling, and power generation can require cooling water. That water use happens where electricity is made, not necessarily where it is consumed. The article warns that water demand could shift away from the Regina-area facility, including to southern Saskatchewan’s coal plants. Water supplies in the Assiniboine River basin vary by season and year, while demand from industry, power generation, agriculture and municipalities may be harder to adjust. Authorities will need to consider cumulative effects, especially during prolonged droughts.

01

How can a data centre use water indirectly even when its own cooling system is closed-loop?

A closed-loop system can keep water use at the data centre low, but it does not erase the water used to make the electricity. A full water account must include both onsite use and the water used by power plants supplying the facility.

Bell says its data centre will use sealed, closed-loop cooling with air-cooled heat rejection, without connecting to groundwater or the municipal supply. But 300 megawatts will come from the provincial grid. Saskatchewan’s coal plants use wet and dry cooling, and power generation can require cooling water. That water use happens where electricity is made, not necessarily where it is consumed.

The article warns that water demand could shift away from the Regina-area facility, including to southern Saskatchewan’s coal plants. Water supplies in the Assiniboine River basin vary by season and year, while demand from industry, power generation, agriculture and municipalities may be harder to adjust. Authorities will need to consider cumulative effects, especially during prolonged droughts.

02

How much electricity will Bell’s data centre need, and how much will come from the grid versus its onsite power supply?

At full operation, Bell Canada’s data centre near Regina will require up to 1.2 gigawatts of electricity. That is the project’s stated maximum demand, and the split between grid and onsite power is important for understanding its wider effects.

The article says 300 megawatts will come from Saskatchewan’s provincial grid. The other 900 megawatts are planned from a dedicated, onsite “bring-your-own-power” scheme. Bell has said the project will use energy responsibly, but local residents have raised concerns about electricity and water use. The article does not identify the specific technology that will supply the onsite power.

The grid portion connects the facility’s demand to SaskPower’s mixed generation portfolio, which includes hydro, wind, solar, coal and natural gas. Most of the province’s capacity comes from fossil fuels. Because power generation can use water, the source of electricity matters to a complete water assessment, even when cooling at the data centre itself uses a closed loop.

03

What is a closed-loop cooling system, and what kinds of water use does it leave out?

A closed-loop cooling system circulates water within a sealed system instead of continually drawing fresh water from an outside source. Bell says its facility will pair this system with air-cooled heat rejection. The design matters because it can reduce the data centre’s direct demand on local water supplies.

Bell says the cooling system will not connect to groundwater or the municipal water supply. But the facility will also use electricity, including 300 megawatts from the provincial grid. Generating that electricity can require water elsewhere. Saskatchewan’s coal plants use a combination of wet and dry cooling, and wet cooling needs a reliable water source to carry heat into the environment.

So the onsite cooling system is only part of the water account. The article says data centres should also count water used to generate their power. Depending on the energy source, that broader account can include power-plant cooling and, for natural gas, water used to drill, extract, process and deliver fuel.

04

What happens to water demand when electricity is generated far from the data centre?

Electricity can be consumed in one place and generated in another. When a data centre relies on distant power plants, some of its water footprint is also located far from the facility. That matters because a local assessment of cooling alone can miss water withdrawn elsewhere to produce its electricity.

The article gives Saskatchewan’s southern coal plants as an example. The data centre near Regina is expected to take 300 megawatts from the provincial grid, and coal plants use a combination of wet and dry cooling. Wet cooling requires water to move heat into the environment. As a result, water demand may shift toward the plants supplying the grid, rather than appearing at the data centre itself.

The article says total ecosystem water withdrawals could increase far from the facility. This is important in the Assiniboine River basin, where water supply varies by season and year. Authorities will need to assess cumulative demand from power generation and other users, especially during prolonged droughts, rather than look only at the data centre’s site.

05

Why do wet-cooled power plants need water, while dry cooling systems generally use more electricity?

Wet-cooled power plants use water to move waste heat into the environment. Water has a high latent heat of vaporization, so evaporation can carry away substantial heat. This cooling method requires a reliable water source to keep the process going.

Dry cooling expels heat using large fans and radiators that move heat into the surrounding air. It does not rely on water in the same way, but those fans and radiators generally use more power. The article compares wet cooling’s evaporative process to sweating: water helps transfer heat away, and a continuing supply is needed.

These choices matter for the data centre’s indirect water footprint. Saskatchewan’s coal plants use both dry and wet cooling technologies, while planned small modular reactors at Rafferty Reservoir would need cooling techniques as well. The article notes that electricity generation remains highly water-intensive overall. Understanding the technology used at power plants helps explain where water demand occurs, even if it is distant from the electricity user.

06

How does Saskatchewan’s mix of coal, natural gas, wind, solar and hydro affect the water used to supply the data centre?

Saskatchewan’s electricity comes from a mix of hydro, wind, solar, coal and natural gas. The mix matters because generating electricity can require water, and different sources involve different water demands. The article emphasizes that electricity generation remains highly water-intensive, so a data centre’s energy source affects its wider water footprint.

SaskPower’s portfolio is mostly fossil-fuel capacity, despite the province’s strong wind and solar resources. Around 25% of Saskatchewan’s power generation capacity comes from coal-fired plants, according to the annual report cited in the article. Those plants use a combination of dry and wet cooling. The article also notes that natural gas production and delivery require water, including for drilling, extraction and processing.

Bell’s facility is expected to draw 300 megawatts from the provincial grid, but the article does not specify which sources will supply that electricity at a given time. A complete assessment must consider water used at generating plants and in fuel supply, not just at the data centre. The province will need to weigh cumulative demand against changing water supplies.

07

Why do seasonal river flows and prolonged drought make it harder to balance water supplies with demand?

Water supplies in the Assiniboine River basin vary with seasonal precipitation and temperatures. The amount of water entering supply reservoirs can change from one year to the next. That makes planning difficult because water availability is not constant, while many users need dependable supplies.

The article says demand from industry, power generation, agriculture and municipalities cannot always adapt to seasonal changes in river flows. Water enters the region’s streams through processes such as spring snowmelt soaking into soils and wetlands filling and spilling into neighbouring streams. More research is needed to understand how these flow-generating mechanisms are changing.

The challenge is to balance shifting supplies with demands that may be difficult to reduce or reschedule. The article warns that authorities need to consider the cumulative effects of increased water demand, particularly during prolonged droughts. Careful management will be needed to conserve finite water resources as new industrial and power-generation demands are considered.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web