JupiteX Get the app
Science & Technology22 Nov 2026 · about 7 min

Where are Junín and Ondores, the epicenter of the powerful magnitude 6.9 earthquake in Peru that was felt in Bogotá and several cities in Colombia?

The brief

Ondores is in the central Andes of Peru, beside Lake Junín, also known as Chinchaycocha. It was the geographic reference used to locate the magnitude 6.9 earthquake. Its high-altitude setting—about 4,080 meters above sea level—makes it a striking place to pinpoint a major quake. The names refer to three different administrative levels. Junín is a department, or region, divided into nine provinces and 124 districts. One province is also called Junín, and its capital shares that name. Ondores is one of the four districts in that province; its capital is also called Ondores. The distinction matters because saying “Junín” alone can mean either the wider region or the province. The quake’s preliminary geographic reference was specifically Ondores, in Junín province and Junín region. The district lies in the northwest of the region, on the Bombón Plateau, and forms part of the area around the National Reserve of Junín.

01

Where are Junín and Ondores, and how are the region, province, and district related?

Ondores is in the central Andes of Peru, beside Lake Junín, also known as Chinchaycocha. It was the geographic reference used to locate the magnitude 6.9 earthquake. Its high-altitude setting—about 4,080 meters above sea level—makes it a striking place to pinpoint a major quake.

The names refer to three different administrative levels. Junín is a department, or region, divided into nine provinces and 124 districts. One province is also called Junín, and its capital shares that name. Ondores is one of the four districts in that province; its capital is also called Ondores.

The distinction matters because saying “Junín” alone can mean either the wider region or the province. The quake’s preliminary geographic reference was specifically Ondores, in Junín province and Junín region. The district lies in the northwest of the region, on the Bombón Plateau, and forms part of the area around the National Reserve of Junín.

02

What is an earthquake’s epicenter, and how is it different from the point underground where the quake begins?

An earthquake begins underground, where rocks suddenly slip along a fault and release energy. Seismologists call that underground starting point the focus, or hypocenter. The epicenter is the location on the surface directly above it. They are related locations, but they are not the same point.

The distinction helps explain the report about this quake. The preliminary bulletin gave a depth of 142 kilometers and used Ondores, in Peru’s Junín region, as its geographic reference. That reference helps identify the area associated with the event, while the depth describes how far below the surface its origin lay. The article does not give a separate, precisely named surface epicenter.

Knowing both locations helps describe an earthquake more clearly: depth locates its underground origin, while the epicenter identifies the corresponding surface position. In this case, the article calls the event a quake of intermediate depth, and Peru’s Geophysical Institute said it shook the country’s central region. The distinction does not, by itself, tell readers exactly how strongly every location felt the shaking.

03

What does a magnitude of 6.9 tell us about the quake’s size, and how deep was it?

Magnitude is a measure of an earthquake’s overall size, based on the seismic waves it produces. A value of 6.9 indicates a major event, but it does not mean every place experiences the same level of shaking. Local effects can vary, so magnitude and felt intensity are not interchangeable. The article reports a magnitude of 6.9 for the quake in central Peru.

The reported depth was 142 kilometers below the surface. That makes it a deep, intermediate-depth event rather than a quake starting right beneath the ground. The Servicio Geológico Colombiano’s preliminary bulletin gave the time as 7:09 p.m. local time and used Ondores, in the Junín region, as its geographic reference.

Together, magnitude and depth describe different features: how large the earthquake was and how far underground it began. The article says the tremor was felt across central Peru and as far away as Colombia. Those reports show that shaking reached beyond the area around Ondores, but the magnitude alone does not specify the damage or intensity at each location.

04

Why could people feel a quake that began in central Peru as far away as Bogotá?

The quake began in central Peru, but its effects were reported much farther away: the article says it was perceived in Bogotá and several Colombian cities. A tremor can travel beyond its source because an earthquake releases seismic waves that move through the Earth and along its surface. People feel them when the waves reach their location.

This was a magnitude 6.9 event, and its reported underground depth was 142 kilometers. Those details help describe why the shaking was not limited to the district of Ondores, which served as the geographic reference. The article reports that the event shook a broad area of Peru as well as reaching across the border into Colombia.

How strongly people feel a quake varies with distance, local ground conditions, building characteristics and other factors; the article does not give measurements for Bogotá. Its report establishes that people there perceived the tremor, not that the shaking was equally strong everywhere. The distance involved is a reminder that earthquake effects can cross national borders, making monitoring and clear reporting important.

05

How widely was the earthquake felt across Peru, from Áncash to Ica and east toward the Amazon?

The reported reach covered a broad stretch of Peru’s central region. Hernando Tavera, scientific director of the Peruvian Geophysical Institute, said the quake was felt from Áncash in the north to Ica in the south. He also described shaking extending eastward through Junín, toward areas transitioning into the Amazon.

That span gives a sense of how widely the event was perceived, rather than suggesting that every place experienced identical shaking. The earthquake had a reported magnitude of 6.9 and began 142 kilometers underground. The article calls it an intermediate-depth quake and identifies Ondores, in the Junín region, as its geographic reference.

The account sets out the event’s reach across several regions but does not provide a detailed intensity map or reports for each town. It also notes that the quake was felt in Colombia, including Bogotá. Together, these details show that the shaking extended well beyond its Peruvian reference area, while the available report describes the broad range rather than the precise local effects.

06

Why did Peru’s energy regulator check the safety of electrical and hydrocarbon infrastructure after the quake?

A strong earthquake can put important infrastructure under strain, so checking facilities helps identify possible safety problems. Peru’s energy and mining investment supervisor, Osinergmin, said it activated its supervisory protocols after the tremor. Its stated purpose was to verify safety conditions at electrical and hydrocarbon infrastructure in the affected areas.

The quake had a magnitude of 6.9 and was reported at a depth of 142 kilometers. It shook Peru’s central region, with the reported reach extending from Áncash to Ica and east through Junín toward the Amazon transition zones. That wide area helps explain why the regulator’s checks covered infrastructure in the zones involved, rather than only the district used as the geographic reference.

The article reports that Osinergmin activated the checks; it does not say what inspectors found or whether any facility was damaged. The immediate aim described was to verify safety conditions. The article does not give further details about the duration of inspections or any later decisions, so those outcomes cannot be inferred from the report.

07

How does the movement of tectonic plates beneath the Andes cause earthquakes in Peru?

The article reports a major earthquake in Peru but does not explain how tectonic plates cause it. As established earth science, Peru lies where the oceanic Nazca Plate moves beneath the continental South American Plate. This process, called subduction, is part of the tectonic setting that formed the Andes and makes the region prone to earthquakes.

The plates do not move smoothly at every point. Where their surfaces become stuck, motion can build stress in the surrounding rock. When that stress is released through sudden movement, seismic waves spread out as an earthquake. This general mechanism helps explain why earthquakes occur in Peru, though the article does not identify the fault or precise plate-boundary process responsible for this particular event.

The reported quake had a magnitude of 6.9 and began 142 kilometers underground, near Ondores in the Junín region. Peru’s Geophysical Institute described it as an intermediate-depth event and said it shook the central region. These details describe this earthquake’s size, depth and reach; they do not establish its exact geological cause.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web