JupiteX Get the app
Science & Technology23 Nov 2026 · about 6 min

Kaiga nuclear unit-1 attains criticality again, gets a second life

The brief

Criticality is the point at which fission in a reactor core produces enough neutrons to keep a chain reaction going by itself. The reaction must remain controlled. In the source article’s definition, a unit attaining criticality has reached a self-sustaining, controlled nuclear fission chain reaction inside its core. This matters because it confirms that the reactor can maintain the fission process needed for operation. Kaiga Generating Station Unit-1 first reached criticality on September 26, 2000. After refurbishment, it attained criticality again, marking a return to this essential operating state. Criticality is not the same as full-power operation or grid supply. It is one milestone in the reactor’s operation, and further checks and steps are generally needed before electricity can be delivered. The article reports KGS-1’s return to criticality but does not describe those subsequent steps or say that the unit had already begun supplying power.

01

What does it mean for a nuclear reactor to attain criticality?

Criticality is the point at which fission in a reactor core produces enough neutrons to keep a chain reaction going by itself. The reaction must remain controlled. In the source article’s definition, a unit attaining criticality has reached a self-sustaining, controlled nuclear fission chain reaction inside its core.

This matters because it confirms that the reactor can maintain the fission process needed for operation. Kaiga Generating Station Unit-1 first reached criticality on September 26, 2000. After refurbishment, it attained criticality again, marking a return to this essential operating state.

Criticality is not the same as full-power operation or grid supply. It is one milestone in the reactor’s operation, and further checks and steps are generally needed before electricity can be delivered. The article reports KGS-1’s return to criticality but does not describe those subsequent steps or say that the unit had already begun supplying power.

02

Why was Kaiga Unit-1 shut down, and what major refurbishment work was carried out?

Kaiga Generating Station Unit-1 had operated for 25 years before it was taken offline. The shutdown was for life-extension work and refurbishment, rather than a routine short pause. The article says the unit had supplied 37,670 million units of electricity before the shutdown.

The major work included EMCCR, meaning en-masse coolant channel replacement, and EMFR, meaning en-masse feeder replacement. These were the stated refurbishment activities. The shutdown date given for the work is April 1, 2025. The article does not provide a component-by-component account of the work or identify a specific fault that prompted it.

The refurbishment aimed to give the unit a new lease of life. NPCIL reported that KGS-1 reached criticality again 600 days after shutdown. It described that turnaround as the shortest such span for an NPCIL reactor, making the completion of the work notable for the company’s reactor fleet.

03

How quickly did Unit-1 return to criticality, and why was that a milestone for NPCIL?

Kaiga Unit-1 attained criticality again 600 days after it was shut down for major refurbishment. That is the interval NPCIL highlighted for the return to a self-sustaining, controlled chain reaction. Criticality is a central restart milestone, although it is not the same as reaching full power or supplying electricity.

The shutdown began on April 1, 2025, for en-masse coolant channel replacement and en-masse feeder replacement. The article says the unit had first reached criticality in 2000 and was taken offline after 25 years of operation for life-extension work. The quick return followed this major refurbishment.

NPCIL said KGS-1 was the first reactor in its fleet to reach criticality in such a short span after shutdown for these activities. That makes the 600-day turnaround a fleet-wide benchmark for the company. The article reports the criticality milestone, but does not give a date for full-power operation or a return to grid supply.

04

How much generating capacity does Kaiga have now, and how much is planned when Units 5 and 6 are complete?

Kaiga Generating Station has four operational nuclear units with a combined generating capacity of 880 MW. That is the capacity the article gives for the station’s current operating units. The figure covers the four units together, not Unit-1 alone.

Two more units, Units 5 and 6, are under construction. The article says they will add 1,400 MW, with each planned as an indigenous 700 MW pressurized heavy-water reactor. Adding the 1,400 MW to the existing 880 MW gives a planned total of 2,280 MW across six units.

The 2,280 MW figure is a planned capacity, not the station’s current operational capacity. The article does not provide completion dates for Units 5 and 6. It notes that domestic industry partners are supplying components and equipment, while Indian contractors are carrying out the work. The projects are presented as aligned with the government’s Atmanirbhar initiatives.

05

After a reactor reaches criticality, what steps are needed before it can supply electricity to the grid?

Criticality means that a controlled fission chain reaction is sustaining itself in the core. It is an important operating milestone, but it does not establish that the reactor is at full power or that electricity is flowing to the grid. The source article reports KGS-1’s return to criticality, not its later commissioning steps.

In general nuclear plant practice, operators then increase reactor power in stages while checking that the reactor and associated systems behave as expected. They also test the steam and turbine systems and the generator. When the plant is ready, the generator must be synchronized with the electricity grid so it can deliver power safely and at the grid’s frequency.

The precise sequence depends on the plant and its approvals. The article does not state whether KGS-1 completed these steps, when it might connect to the grid, or when it would reach full power. These steps describe general practice, not a report of KGS-1’s status after criticality. Criticality alone should not be read as proof of grid supply.

06

What are coolant channels and feeders in a pressurized heavy-water reactor, and why might they need replacement?

In a pressurized heavy-water reactor, coolant channels are assemblies inside the reactor that hold fuel and provide a path for coolant to remove heat. Feeders are pipes that connect the channels to the reactor’s coolant circuit. This is general PHWR design information; the source article names the replacement work but does not explain the components in detail.

The article says KGS-1 underwent EMCCR, or en-masse coolant channel replacement, and EMFR, or en-masse feeder replacement. “En-masse” indicates replacement on a large scale rather than replacing only one component. The work was part of major refurbishment after the unit was taken offline for life extension.

Such components can need replacement as part of long-term maintenance because they operate under demanding conditions, including heat, pressure, and radiation. The article does not specify the condition of KGS-1’s channels or feeders, or give the particular reason each needed replacement. It reports that the unit returned to criticality 600 days after the refurbishment shutdown.

07

How does controlled nuclear fission create heat that a reactor can turn into electricity?

Nuclear fission happens when a heavy atomic nucleus splits into smaller parts and releases energy, including heat and neutrons. Some of those neutrons can trigger further fissions. When enough fissions continue to sustain the process, the reactor is critical; controlling the reaction helps keep its power within operating limits. The source article defines criticality as a self-sustaining, controlled chain reaction.

In a typical nuclear power plant, heat from fission is carried away by coolant. That heat is used to produce steam, directly or through a heat exchanger, depending on the plant design. The steam turns a turbine, and the turbine drives a generator to produce electricity. This describes the general mechanism, not details of KGS-1’s systems.

The article focuses on KGS-1 reaching criticality after refurbishment; it does not explain how the unit converts heat into electricity. It also does not say that the unit had returned to grid supply. The key distinction is that criticality establishes a sustained fission reaction, while electricity generation requires the plant’s heat-transfer and turbine-generator systems to operate as well.

This brief was written by AI from the original reporting and checked by other models. Names, figures and quotes come from the source; read it for full context.

Read more in the JupiteX app

Pulse is free. New stories every 4 hours, each one broken into the questions that explain it.

Or read more news on the web